A well-known stone processing enterprise group in the Philippines has officially put into operation a 40-square-meter hydraulic manual filter press system custom-made by our company. This equipment will be specifically used for the treatment of wastewater generated in the marble cutting process, marking a major breakthrough in the field of environmentally friendly production in the Philippine stone industry.

Tailor-made solutions

In response to the customer's production capacity requirement of 20 cubic feet (566L), our technical team has meticulously designed this high-performance filter press

• An ultra-large filtration area of 40 square meters combined with a chamber volume of 600 liters

• 870×870mm reinforced polypropylene filter plates are adopted

• Hydraulic clamping system (working pressure 0.5-0.6MPa)

• Open filtrate discharge design

• Manual plate shifting operation mode

Advantages of the process flow

Hydraulic automatic pressing: Ensures the sealing performance of the filter plates

Manual feeding control: Precisely adjust the processing rhythm

High-efficiency filtration and shaping: Rapidly form filter cakes with low moisture content

Hydraulic release + manual plate moving: balancing efficiency and operability

Practical application effect

The single processing capacity reaches 600 liters

The moisture content of the filter cake is less than 28%

The water recovery rate exceeds 80%

It processes an average of 50 tons of wastewater per day

The service life of the filter plates is expected to be over 5 years

"The system perfectly meets our demand for treating high-solid-content cutting wastewater," said the person in charge of a stone processing enterprise in the Philippines.